Standard Number Of Turns

10-turn

Standard Resistance Range

100Ω~50KΩ

Max. Practical Resistance Value

100KΩ

Total Resistance Tolerance

Standard Class ±5%(H), Precision Class ±1%(F)

Independent Linearity Tolerance

Standard Class ±0.15%(≥5K)、±0.25%(<5K), Precision Class ±0.1％, (Within 5kΩ) (±0.15%)

Power Rating

2.0W

Noise

<100ΩE.N.R.

Electrical Travel

3600°±5°

Mechanical Travel

3600°

Insulation Resistance

>1000MΩ(500V.D.C.)

Dielectric Strength

1 minute at 1,000V.A.C.

Starting Torque

<10mN•m(100gf•cm)

Stopper Strength

Approx.0.35N•m(3.5kgf•cm)

Appropriate fastening torque of the nut

<3.0N•m(30kgf•cm)(In case of panel thickness with over 2.5mm., the rotating torque may become heavier.)

Resistance Temperature Coefficient

±20p.p.m./℃

Shaft Materials

Stainless steel

Housing Case Materials

Glass-filled nylon

Busihing Materials

Uncoated brass

Terminals Materials

Gold-plated brass (All terminals can be fitted with the Tyco 110 series faston receptacle (2.8× 0.5mm) or equivalents.)

Mass

Approx.23g

Special turns

1, 2, 3, 4, 6, 7 and 8-turn versions are available (These versions have same outer dimensions, but general specifications are please request us for details)

Special shaft type

Shaft with front and rear extension (Rear shaft with 6mm dia. and 15mm length), special shaft dia. (φ 3mm, φ3.175mm, φ4mm, φ5mm), special machining on the shaft

Special housing case

Simple sealed housing

Special torque

With high torque

Special accessories

Slipping-clutch incorporated type（20mN・m ～ 60mN・m）

Special taps

Extra tap (Available up to 1 tap only for 10-turn model)

Special mounting

Servomount type (Same dimensions as 22HHPS-10)

Special gangs

Multi-ganged (Available up to 10 gangs)