Producto Producto

Producto

Sibo se ha enfocado en potenciómetros y sensores durante 29 años.

EBM30A
EBM30A

EBM30A

Absolute Multi-turn Encoders

浏览量: Tiempo: 2023-01-09

    Características:

  • Magnetic encoders

  • Absolute multi-turn:30/60 turns

  • Up to 14bit for single-turn

  • Output signal:RS485, CAN

  • Zero point setting at any position

Dimensión

尺寸图_SENTOP_EBM30A.jpg

Parámetro

General Mechanical Specifications

Mechanical angle

360º(Endless)

Protection degree

IP40

Operating torque

Standard: <5mN·m;Optional:5mN·m~10mN·m

Life expectancy

>50,000,000

Mass

Approx.65g

Housing material

Zinc alloy

Shaft material

Stainless steel

Connection

8pin connector 2mm 2x4P

Environmental Specifications

Operating temperature range

-30℃~+85℃

Storage temperature range

-30℃~+85℃

ESD durability

Contact discharge ±8KV,Aerial discharge ±15KV,EN61000-4-2:2009

EMS durability

10V/m (80MHz~1GHz,1KHz80% Amplitude modulation),EN61000-4-3:2006+A1:2010

General Electrical Specifications(RS485)

Standard model

EBM30A-E3-W1230T485

Input voltage

Standard:3.3V~5VDC; Optional:12V~30VDC"

Current consumption (no-load)

<80mA

Single-turn resolution

4096 (12bit)

Multi-turn

Standard:30 Turns; Optional:60 Turns

Independent linearity tolerance

±0.3%

Repeatability accuracy

±1Lsb (The actual accuracy is related to the installation accuracy)

Protocol

Modbus RTU slave

Multi-turn data bits

8bit

Single-turn angle data bits

12bit

Baud rate

Default 9600 bps, N, 8,1, settable

Address

Default 1, settable

Update signal

10μs

Insulation resistance

>1000MΩ (500V.D.C)

Dielectric strength

1 min (500V.A.C)

General Electrical Specifications(CAN)

Standard model

EBM30A-E3-W1230TCAN

Input voltage

Standard:3.3V~5VDC; Optional:12V~30VDC"

Current consumption (no-load)

<80mA

Single-turn resolution

Standard:4096 (12bit)

Multi-turn

Optional:16384 (14bit);

Independent linearity tolerance

Standard:30 Turns; Optional:60 Turns

Repeatability accuracy

±0.3%

Protocol

±1Lsb (The actual accuracy is related to the installation accuracy)

Communication distance

CANopen

Insulation resistance

Min. 50ms

Dielectric strength

>1000MΩ (500V.D.C)

Special Specifications Available

Speical cable and connector

Available for connector with shield cable; Available for shield cable;Cable with sepcial connectors are available.

Special shaft

Special length of shaft、special diameter or special machining on shaft (like shaft slotted、fatted etc.)

Other output characteristics

If you need the product of analog 0-5V, 0-10V, 4-20mA output and the product of absolute SSI output, please refer to our contactless potentiometer R30M and encoder EAM30A.