Producto Producto

Producto

Sibo se ha enfocado en potenciómetros y sensores durante 29 años.

LHK15-30
LHK15-30

LHK15-30

Linear Contactless POT.

浏览量: Tiempo: 2023-01-09

    Características:

  • Magnetic rotary sensor (Hall effect)

  • Linear Potentiometers/Linear Sensors

  • With front and rear extended

Dimensión

尺寸图_SAKAE_直线_LHK15-30.jpg

Parámetro

General Specifications

Current Consumption

Single output: Max. 15mA, dual output/Dual Independent output: Max. 30mA 

Independent Linearity Tolerance

±0.5%FS

Mechanical Stroke (MS)

Approx. 34mm

Electrical Stroke

30mm±0.5mm

Applied Voltage

5V±10%D.C.

Load Resistance

>10KΩ

Effective Output

10%±3%~90%±3%Vin

Output Temperature Characteristics

Within ±0.8% Vout・FS

Operating Temperature Range

- 40°C~+105°C

Storage Temperature Range

- 40°C~+105°C

Friction

<0.6N(60gf)

Stopper Strength

Approx. 20N(2kgf)

Mass

Approx. 44g

Special Specifications Available

Thermal Shock

5 cycles - 40°C~+105°C

Exposure at Low Temperature

24 hours at - 40°C

Exposure at High Temperature

1,000 hours at +105°C

Vibration

10~2000Hz 196m/s2 12小时

Shock

980m/s2 6ms(18 times)

Life Expectancy

Approx. 50,000,000 reciprocating motions

EMS Tolerance

100V/m(80MHz~1GHz 1kHz Sinwave80% Amplitude Modulation)

ESD Tolerance

±8kV contact discharge /±15kV aerial discharge (Based on IEC 61000-4-2)

Special Specifications Available

Special shaft type

Special machining on the shaft

With spring return device

Spring return device is mounted on the outer shaft and the shaft length is changed. Also, the expected longevity would be around 10,000,000 reciprocating motions.

Special output

PWM, cross, parallel, dual independent output

Special mode

Low current consumption in slow mode