Producto Producto

Producto

Sibo se ha enfocado en potenciómetros y sensores durante 29 años.

H80FCL
H80FCL

H80FCL

Magnetic-type Pedals

浏览量: Tiempo: 2023-01-09

    Características:

  • With a hall effect IC

  • Long life expectancy

  • Stepping pedal type

Dimensión

尺寸图_SAKAE_踏板_H80FCL.jpg

Parámetro

General Specifications

Operating method

Stepping pedal type

Operating angle

Approx.20°C

Operating force

Standard automatic spring return device, Abt.10N・60N(Abt.1,000gf.~6,000gf.)

Operating temperature range

-20℃~+65℃

Vibration

10~55HZ,98m/s2

Shock

294m/s2

Life expectancy

Approx.2,000,000 operations

Mass

Approx.850g

Electrical Specifications

Hall effect IC type potentiometer is incorporated

SHSM18E, hall effect IC type single-turn contactless potentiometer, Applied voltage: 5V±10% D.C., Output range: Apporx.10%~90% Vin, Independent linearity tolerance: ±3%

Dielectric strength

1 minute at 250V.A.C.

Insulation resistance

>100MΩ at 250V.D.C.

EMS durability

100V/m(80MHz~1GHz 1KHz sine-wave 80%AM modulation)

ESD durability

±8KV contact discharge/±15KV aerial discharge (Based on IEC61000-4-2)

Special Specifications Available

With switch incorporated

D version switch: SW "ON" at about 3° from the beginning of stepping under 1V±0.3V.D.C. output. F version switch: SW "ON" at about 3° from the end of stepping under 4V±0.3V.D.C. output.

With kick-down device

Operating force is increased at about 5°from the end of stepping (Max. approx. 250N)

With special output

Dual parallel output, Dual cross output.

Potentiometer with conductive plastic element

Type FCP22E is incorporated.