English

Product Product

Product

Sibo has focused on potentiometers and sensors for 31 years.

FSCB50A
FSCB50A

FSCB50A

1-turn Non-linear POT.(SINCOS)

    Characteristics:

  • Conductive Plastic

  • Servomount

  • RoHS Compliant

Dimension

FSCB50A(图1)

Parameter

General Mechanical Specifications

Mechanical travel

360º(Endless)

Protection grade (IP)

IP40

Starting torque

≤5mN·m(50gf·cm)

Rotational life expectancy

25℃, No load at 400 r.p.m., inverting every 15 minutes50,000,000 shaft revolutions, Total resistance value variation:≤±10% against initial value, Conformity tolerance: ≤150% of specified value, Output smoothness: within 150% of specified value

Mass

Approx.120g

Environmental Specifications

Operating temperature range

-55℃~+105℃

Temperature cycle

5 cycles under -55℃~+105℃, total resistance value variation: ≤±10%, No mechanical damage.

Exposure at low temperature

24 hours at -55℃, Total resistance value variation: ≤±5%, No mechanical damage.

Exposure at high temperature

1,000 hours at 105℃, Total resistance value variation: ≤±10%, No mechanical damage.

Vibration

10Hz~2000Hz, 147m/s², 12 hours, Total resistance value variation: ≤±2%, No mechanical and electrical damage.

Shock

490m/s², 11ms, 18 times, Total resistance value variation: ≤±1%, No mechanical and electrical damage.

Moisture resistance

40℃, 95%RH, 120 hours, Total resistance value variation: ≤±10%,Insulation resistance: ≥10MΩ.

Resistance temperature coefficient

±400p.p.m./°C

General Electrical Specifications

Standard resistance values

1k, 2k, 5k, 10k(Ω)

Special practical resistance values

20k, 50k,100K(Ω)

Total resistance tolerance

Standard class ±15%(L),Precision class ±10%(K)

Conformity tolerance (peak-peak)

Standard class ±0.5%;Precision class ±0.3%;Super precision class ±0.2%"

Resolution

Essentially infinite

Output smoothness

≤0.1% against input voltage

Contact resistance variation

≤8%C.R.V.

Electrical travel

360º(Endless)

Power rating

1.25W

Insulation resistance

≥1000MΩ (1000V.D.C.)

Dielectric strength

1000V.A.C./1 min

Special Specifications Available

Special shaft type

Shaft with front and rear extension (Rear shaft with 6mm dia. and 15mm length), shaft dia. (φ6.35mm) with inch dimension, special machining on the shaft

Special mounting

Bushingmount type

Multi-ganged

Up to 3 gangs. Housing length is extended by 17mm per gang.

Special protection grade (IP)

IP54