English

Product Product

Product

Sibo has focused on potentiometers and sensors for 31 years.

12HHP-10
12HHP-10

12HHP-10

Multi-turn Hybrid POT.

    Characteristics:

  • Hybrid

  • Bushingmount

  • Servomount

  • RoHS Compliant

Dimension

尺寸图_SAKAE_多圈_12HHP.jpg

Parameter

General Mechanical Specifications

Mechanical travel

3,600°

Protection grade (IP)

IP40

Starting torque

Bushingmount type:≤3mN·m (30gf·cm)

Stopper strength

Servomount type:≤2mN·m (20gf·cm)

Appropriate fastening torque of the nut

Approx. 0.15N·m (1.5kgf·cm)

Rotational life expectancy

≤0.8N·m (8kgf·cm)

Mass

25℃,No load at 40r.p.m.

Special Specifications Available

Special turns

5-turn type (S12HHP-5)

Special resistance value

Shaft with front and rear extension (Rear shaft with 0.8mm dia. and 10mm length), special machining on the shaft

Special housing case

Simple sealed housing (in case of servomount type, the housing length becomes longer by 1.2mm.)

Environmental Specifications

Operating temperature range

-55℃~+105℃

Temperature cycle

5 cycles under -55℃~+105℃, total resistance value variation: ≤± 5%, No mechanical damage."

Exposure at low temperature

24 hours at -55℃, Total resistance value variation: ≤±5%, No mechanical damage.

Exposure at high temperature

1,000 hours at 105℃, Total resistance value variation: ≤±5%, No mechanical damage.

Vibration

10Hz~2000Hz, 147m/s², 12 hours, Total resistance value variation: ≤±5%, No mechanical and electrical damage.

Shock

490m/s², 11ms, 18 times, Total resistance value variation: ≤±1%, No mechanical and electrical damage.

Moisture resistance

40℃, 95%RH, 120 hours, Total resistance value variation: ≤±10%,Insulation resistance: ≥10MΩ.

Resistance temperature coefficient

±100p.p.m./℃

General Electrical Specifications

Standard turns

10 Turns

Standard resistance values

2k, 5k, 10k, 20k, 50k (Ω)

Total resistance tolerance

Standard class ±10%(K),Precision class ±5%(J)

Independent linearity tolerance

Standard class ±0.4%,Precision class ±0.1%(≤5kΩ, ±0.2%)

Resolution

Essentially infinite

Output smoothness

≤0.05% against input voltage

Contact resistance variation

≤5%C.R.V.

Electrical travel

3,600°±5°

Power rating

1.0W

Insulation resistance

≥1000MΩ (500V.D.C.)

Dielectric strength

1000V.A.C./1 min

Special Specifications Available

Special shaft type

Shaft with front and rear extension (Rear shaft with 0.8mm dia. and 10mm length), special machining on the shaft

Speical turns

5Turns(S12HHP-5)

Speical protection grade (IP)

Simple sealed housing IP54 (In the case of servomount type, the housing length becomes longer by 1.2mm.)