English

Product Product

Product

Sibo has focused on potentiometers and sensors for 31 years.

46HD
46HD

46HD

Multi-turn Wire-wound POT.

    Characteristics:

  • Wirewound

  • Bushingmount

  • Servomount

  • RoHS Compliant

Dimension

46HD(图1)

Parameter

General Mechanical Specifications

Mechanical travel

360°×n (n:Number of turns)

Protection grade (IP)

IP40

Starting torque

Bushingmount type:≤20mN·m (200gf·cm) ; Servomount type:≤10mN·m (100gf·cm)

Stopper strength

Approx. 0.9N•m (9kgf•cm)

Rotational life expectancy

25℃,No load at 40r.p.m;3Turns ——600,000 shaft revolutions;5 turns——1,000,000 shaft revolutions;10,15,20 Turns——2,000,000 shaft revolutions;Total resistance value variation:≤± 5% against initial value;Independent Iinearity tolerance:≤150% of specified value;Noise: ≤500Ω E.N.R.

Mass

Approx. 90g (3~5 Turns), Approx. 120g (10 Turns);Approx. 150g (15 Turns), Approx. 180g (20 Turns)

Environmental Specifications

Operating temperature range

-55℃~+105℃

Temperature cycle

5 cycles under -55℃~+105℃, total resistance value variation: ≤± 5%, No mechanical damage.

Exposure at low temperature

24 hours at -55℃, Total resistance value variation: ≤±5%, No mechanical damage.

Exposure at high temperature

1,000 hours at 105℃, Total resistance value variation: ≤±5%, No mechanical damage.

Vibration

10Hz~2000Hz, 147m/s², 12 hours, Total resistance value variation: ≤±5%, No mechanical and electrical damage.

Shock

490m/s², 11ms, 18 times, Total resistance value variation: ≤±1%, No mechanical and electrical damage.

Moisture resistance

40℃, 95%RH, 240 hours, Total resistance value variation: ≤±10%,Insulation resistance: ≥10MΩ.

Resistance temperature coefficient

±20p.p.m./°C

General Electrical Specifications

Standard turns

3Turns;5Turns;10Turns;15Turns;20Turns

Standard resistance range

10Ω~20kΩ;20Ω~50kΩ;50Ω~100kΩ;50Ω~100kΩ;50Ω~200kΩ

Max. practical resistance value

50k,100kΩ;100kΩ;200kΩ;200kΩ;500kΩ

Total resistance tolerance

Standard class ±3%(H),[Resistance≤1kΩ,±5%(J) ];Precision class ±1%(F),[in the pot. with a single-wire resistive element,±2%(G)]

Independent linearity tolerance Standard class

±0.4%;±0.4%;±0.3%;±0.3%;±0.3%

Independent linearity tolerance Precision class

±0.2%;±0.2%;±0.1%;±0.1%;±0.1%

Independent linearity tolerance (≤5kΩ)

(±0.25%);(±0.25%);(±0.15%);(±0.15%);(±0.15%)

Electrical travel

360°×n±5° (n: Number of turns)

Power rating

2.0W;2.5W;5.0W;7.5W;10.0W

Insulation resistance

≥100MΩ (1000V.D.C.)

Dielectric strength

1000V.A.C./1 min

Noise

≤100ΩE.N.R.

Standard Resistance Values

Standard resistance values (Ω)

10;20;50;100;200;500;1k ;2k ;5k

Number of wire turns 3 Turns

556;690;950;1,190;1,515;2,080;2,550;-;-

5 Turns

※;925;1,275;1,640 ;2,080 ;2,860;3,450 ;-;-

10 Turns

※;※;2,000 ;2,500 ;3,180 ;4,350 ;5,400;6,850 ;-

15 Turns

※;※;2,530 ;3,220 ;4,160 ;5,710 ;7,410 ;9,510 ;-

20 Turns

※;※;3,030 ;3,920 ;5,120 ;7,140 ;9,300 ;11,900;14,100

Resistance wire used

Cu-Ni

Standard resistance values (Ω)

2k;5k;10k ;20k;50k;100k;200k;500k

Number of wire turns 3 Turns

2,330;3,225;4,080;5,130;※6,890;※8,330;-;-

5 Turns

3,230;4,170;5,720;7,410 ;11,000;※12,500;-;-

10 Turns

-;6,600;8,550;10,850 ;14,900;18,850;※24,390;-

15 Turns

-;8,800;11,300;14,500;20,000;25,600 ;※32,250;-

20 Turns

-;-;13,150;16,950;23,250;30,790;38,200;※55,550

Resistance wire used

Ni-Cr

Special Specifications Available

Special shaft type

Shaft with front and rear extension (in case of bushingmount type, rear shaft with 6mm dia. and 28mm length together with the bushing of M9×10mm and in case of servomount type, rear shaft with 6mm dia. and 15mm length), shaft dia. (φ6.35mm) & bushing with inch dimension, special machining on the shaft

Speical turns

30Turns(S46HD-30)

Multi-ganged

Up to 2 gangs

Oil-filled type

OF46HD

Speical protection grade (IP)

IP54 Simple sealed housing

With limit-switches

With limit-switches